CONFIG_ARCH_S3C2410 is not available for thedefaultarchitecture x86.
Result is shown for architecture arm
Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443
modulename: setup-i2c.ko
configname: CONFIG_ARCH_S3C2410
ARM system type
└─>Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443
In linux kernel since version 2.6.12
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
source code:
is selected by
CONFIG_CPU_FREQ_S3C24XXCONFIG_CPU_S3C2442
CONFIG_CPU_S3C2412
CONFIG_PLAT_S3C
CONFIG_CPU_S3C2443
CONFIG_CPU_S3C2440
CONFIG_PLAT_S3C24XX
CONFIG_S3C2410_DMA
CONFIG_CPU_S3C2410
CONFIG_SND_S3C24XX_SOC
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650
CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X
CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES