Samsung S3C framebuffer support
modulename: s3c-fb.ko
configname: CONFIG_FB_S3C
Linux Kernel Configuration
└─>Device Drivers
└─>Graphics support
└─>Support for frame buffer devices
└─>Samsung S3C framebuffer support
In linux kernel since version 2.6.30 (release Date: 2009-06-09)
Frame buffer driver for the built-in FB controller in the Samsung
SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
and the S3C64XX series such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
actual capabilities depending on the chip. For instance the S3C6400
and S3C6410 support 4 hardware windows whereas the S3C24XX series
currently only have two.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
and the S3C64XX series such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
actual capabilities depending on the chip. For instance the S3C6400
and S3C6410 support 4 hardware windows whereas the S3C24XX series
currently only have two.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
source code:
depends
CONFIG_FBCONFIG_HAS_IOMEM
CONFIG_S3C_DEV_FB or CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S3C64XX or CONFIG_ARCH_S5PV210 or CONFIG_CPU_S3C2416 or CONFIG_HAVE_CLK or CONFIG_ARCH_S3C64XX or CONFIG_COMPILE_TEST