AIMSlab RadioTrack (aka RadioReveal) support
modulename: radio-aimslab.ko
configname: CONFIG_RADIO_RTRACK
Linux Kernel Configuration
└─>Device Drivers
└─>Multimedia support
└─>Radio Adapters
└─>ISA radio devices
└─>AIMSlab RadioTrack (aka RadioReveal) support
In linux kernel since version 2.6.20 (release Date: 2007-02-04)
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
Note that newer AIMSlab RadioTrack cards have a different chipset
and are not supported by this driver. For these cards, use the
RadioTrack II driver below.
If you have a GemTeks combined (PnP) sound- and radio card you must
use this driver as a module and setup the card with isapnptools.
You must also pass the module a suitable io parameter, 0x248 has
been reported to be used by these cards.
More information is contained in the file
Documentation/video4linux/radiotrack.txt.
To compile this driver as a module, choose M here: the
module will be called radio-aimslab.
in the port address below.
Note that newer AIMSlab RadioTrack cards have a different chipset
and are not supported by this driver. For these cards, use the
RadioTrack II driver below.
If you have a GemTeks combined (PnP) sound- and radio card you must
use this driver as a module and setup the card with isapnptools.
You must also pass the module a suitable io parameter, 0x248 has
been reported to be used by these cards.
More information is contained in the file
Documentation/video4linux/radiotrack.txt.
To compile this driver as a module, choose M here: the
module will be called radio-aimslab.