CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA is not available for thedefaultarchitecture x86.
Result is shown for architecture arm
Kernel low-level debugging messages via Tegra UART via ODMDATA
configname: CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
Kernel low-level debugging port
└─>Kernel low-level debugging messages via Tegra UART via ODMDATA
In linux kernel since version 3.1 (release Date: 2011-10-24)
Automatically determines which UART to use for low-level
debug based on the ODMDATA value. This value is part of
the BCT, and is written to the boot memory device using
nvflash, or other flashing tool. When bits 19:18 are 3,
then bits 17:15 indicate which UART to use; 0/1/2/3/4
are UART A/B/C/D/E.
debug based on the ODMDATA value. This value is part of
the BCT, and is written to the boot memory device using
nvflash, or other flashing tool. When bits 19:18 are 3,
then bits 17:15 indicate which UART to use; 0/1/2/3/4
are UART A/B/C/D/E.