GPIO based peripheral-only VBUS sensing 'transceiver'
modulename: phy-gpio-vbus-usb.ko
configname: CONFIG_USB_GPIO_VBUS
Linux Kernel Configuration
└─>Device Drivers
└─>USB support
└─>USB Physical Layer drivers
└─>GPIO Support
└─>GPIO based peripheral-only VBUS sensing 'transceiver'
In linux kernel since version 2.6.29 (release Date: 2009-03-23)
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
optionally control of a D+ pullup GPIO as well as a VBUS
current limit regulator. This driver is for devices that do
NOT support role switch. OTG devices that can do role switch
(master/peripheral) shall use the USB based connection
detection driver USB_CONN_GPIO.
internal transceiver via the usb_phy interface, and
optionally control of a D+ pullup GPIO as well as a VBUS
current limit regulator. This driver is for devices that do
NOT support role switch. OTG devices that can do role switch
(master/peripheral) shall use the USB based connection
detection driver USB_CONN_GPIO.