Theobroma Systems UCAN interface
modulename: ucan.ko
configname: CONFIG_CAN_UCAN
Linux Kernel Configuration
└─>Networking support
└─>CAN bus subsystem support
└─>CAN Device Drivers
└─>CAN USB interfaces
└─>Theobroma Systems UCAN interface
In linux kernel since version 3.10 (release Date: 2013-06-30)
This driver supports the Theobroma Systems
UCAN USB-CAN interface.
The UCAN driver supports the microcontroller-based USB/CAN
adapters from Theobroma Systems. There are two form-factors
that run essentially the same firmware:
* Seal: standalone USB stick
https://www.theobroma-systems.com/seal)
* Mule: integrated on the PCB of various System-on-Modules
from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
(https://www.theobroma-systems.com/rk3399-q7)
UCAN USB-CAN interface.
The UCAN driver supports the microcontroller-based USB/CAN
adapters from Theobroma Systems. There are two form-factors
that run essentially the same firmware:
* Seal: standalone USB stick
https://www.theobroma-systems.com/seal)
* Mule: integrated on the PCB of various System-on-Modules
from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
(https://www.theobroma-systems.com/rk3399-q7)